Epoxy is the prefered alternative when the FP tank lining system can`t be used. EF have tried and tested many of the various epoxy coatings on the market today, and have found the SIKA system to be far and away the best coating on the market at present. EF have applied the SIKA system to numerous process water tanks and cwst`s alike. A wide variation of coatings are available, each tailored to withstand different ...

Water Tank Refurbishment & Replacement  Welcome to our Website Environmental Fabrications are the UK`s premier water tank refurbishment company. EF are unique, as we offer both the refurbishment and / or the replacement of existing water tanks. We also offer a full range of products and services associated with bringing existing water tanks upto current health and safety regulations. Water Tank Refurbishment We offer two methods of water tank internal...

Environmental Fabrications provides a complete water tank replacement service and has completed a significant number of projects in recent years, from small six panel builds to large multi sectionals. Sectional tanks can be constructed from small 500mm x 500mm panels upto 1000mm x 1000mm. Temporary tanks can be installed to maintain water supplies while main replacements are carried out. Please contact us for a free site survey, where we can assess the best...

Environmental Fabrications have recently developed a system for repairing leaking sprinkler tanks. This system involves repairing any existing leaks and finishing of with a corrosion resistant coating to prevent further corrosion. This system actually costs around 75% less than a new installation !

Environmental Fabrications carry out the insulation of all types of cold water storage tanks, from small one piece galvanised tanks to multi sectional tanks. The insulation materials used can vary depending on the type of tank. The type of insulation materials used are 25mm/50mm foil backed rockwool slabs or blanket wrap, 25mm/50mm kingspan or Neoflam    

The Flexible Polypropylene water tank lining System is viable alternative to water tank renewal. All Linings are pre-manufactured from rolls of polypropylene using our hot air welding system. This process reduces the installation time and therefore allows work normally carried out at weekends, to be completed during weekday working. Your Polypropylene water tank will be designed and manufactured by a highly experienced installation engineer. 30% Cost of...

EF carry out the chlorination of domestic and commercial hot and cold water systems, this can be by way of a routine chlorination or after a tank or pipework installation. EF specialise in the chlorination of water systems by way of Tank Gravity Feed or Direct Injection. Chlorination is carried out with Chlorine Dioxide or Sodium Hypochlorite. On completion of the chlorination, the chlorinated water is neutralised and pumped to drain. For more information on...

A Legionella risk assessment is a site-specific document that details the findings of an examination of the entire water system within the premises. The legionella risk assessments purpose is to identify if there are any parts of the system that might support or enable the growth of the Legionella bacteria and therefore present a risk by contaminating the system. The legionella risk assessment takes into account the following factors: * Water Temperature * Water...

Site visit ( Survey existing water tanks ) Free report ( Outlining any remedial works needed to bring tanks inline with current health and safety regulations ) Photographs of existing tanks and condition Quotation for any remedial works required